IPSPRO warranties this product to the original purchaser for One Year for manufacturing defects due to faulty components or workmanship from the date of purchase for Registered users. This warranty does not cover part failure due to non compliance with these instructions, normal wear, or tool abuse resulting in cracked, broken or damaged components. Deficient parts or units will be replaced or repaired at IPSPRO’S discretion. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. FOR ALL WARRANTY REPAIRS YOU MUST E-MAIL THE MANUFACTURER WITH A DESCRIPTION OF THE PROBLEM AND PHOTOS OR A VIDEO TO: CONTACT@IPSPRO.US
FOR ALL OTHER REPAIRS, PARTS AND ACCESSORIES contact one of our Authorized Repair Facilities listed below or visit http://ipspro.us to shop Online. Note: Return freight, packing and insurance costs, if any, will be paid by the owner.
Florida 1145 Via Jardin West Palm Beach, FL 33418 Email : email@example.com
NOTE : Date of Purchase and Serial Number are required. ***Please indicate YOUR serial number in the comment section of the online registration***
The Manufacturers Warranty will be voided if the following procedures are not followed. Failure to register your sprayer by using the Online Warranty Registration below.
Using one of the provided filters to prevent debris from clogging the pump.
After every use, rinse out the sprayer and tips by spraying 1 gallon of water (approximately 1-2 minutes) through the pump to rinse any residual products from the unit to prevent corrosion or clogs, then remove the battery.
If used for applying sealers, deck stains and other coating products, always rinse the gun using a Sodium Hydroxide based deck stain stripping product, and then fresh water to remove the residue of the deck stain remover. DO NOT USE MINERAL SPIRITS OR PAINT THINNERS.
NOTE: Sprayers manufactured with a serial number AFTER 2016/04/May be used for spraying Hydrochloric acid based products.